Flaman Rentals Blog

6 Reasons to Use a Riteway 7-Bar Harrow This Year

Posted by Mitch Flaman May 06, 2022

When it’s time to get your fields prepped for seeding, there are a few different equipment options to choose from. 

For many years, harrows have been used to prepare fields in different capacities. Whether you are levelling off ruts, busting up hardpan, or removing trash before seeding, both the Riteway 5-bar and 7-bar harrows have a specific purpose in the tillage cycle. With low-till or zero-tillage farming practices gaining popularity in the last decade, you need a way to create ideal seedbeds for your crop.


Riteway 5-Bar Heavy Harrow in use

Heavy harrows, often known as 5-bar harrows, are very common and do a great job moving dirt, even in wet conditions. The Riteway 7-bar harrow is lighter than a traditional heavy harrow and has twice as many tines, offering you the flexibility you need to deal with excess straw post-harvest and residue management before seeding.


Riteway 7-Bar Harrow

We put together six reasons why you should consider using a Riteway 7-bar harrow this year.

1. Trash and Residue Removal

“At its most basic point: if you’re looking to move soil – stick with your 5-bar, but if you’re looking for trash management there’s no better way to go than the 7-bar harrow.”
Brad Grass, Territory Sales Manager at Riteway Manufacturing

Think about how you use a large fan rake to clean up all the leaves in the fall. You go over the surface of your lawn, gently collecting the leaves and removing them. When using a garden rake, you collect everything from the roots of your grass – eliminating everything that protects the soil.

7-bar harrows work much the same as a large leaf rake, cleaning up and breaking down straw residue, while leaving the soil mildly agitated. Featuring twice as many tines as a heavy harrow, the 7-bar’s ½” tines provide better agitation as the harrow floats over the field – allowing for greater trash removal and distribution.

24" long 1/2" tines on the Riteway 7-Bar Harrow

2. Moisture Retention

The smaller diameter tines on the 7-bar harrow provide greater agitation while disturbing less ground. By only mixing up the top layer of the soil, it allows the moisture to stay in the ground. The goal is to remove extra trash on the surface, not dry out the soil. 
 

3. Less Soil Compaction

The 82’ Riteway 7-bar harrow weighs 19,900 lbs and is the heaviest and strongest 7-bar in its class. Despite its weight, the 7-bar won’t compact the soil down as much as a heavy harrow because it floats over the topsoil instead of digging down. Less compaction, combined with better moisture retention, creates a better environment for plant development. 


Riteway 7-Bar Harrow in use

4. Seed Bed Prep

Remove all the trash and debris left from harvest and prepare your seedbeds without removing soil. This allows the seed drills to move easily through the field with less straw build-up around the knife. After using a 7-bar harrow, you’ll end up with a nice, clean surface for a fresh start in the spring.


Riteway 7-Bar Harrow field demo

5. Herbicide Application

As some weeds become resistant to certain herbicides, older chemicals are making a comeback. Because granular herbicide mixes well with topsoil, the 7-bar harrow can effectively protect your crops from invasive weeds. The 7-bar helps introduce the granular chemical into the soil just enough so that it can be evenly distributed throughout the field.
 

6. Mechanical Weed Removal

The 7-bar’s lightweight spring tines help manage weeds that start to thrive in your field after harvest. By damaging these weeds enough so they stop growing, your crops have less competition for nutrients in the soil.

Spring Pressure Kit on the Riteway 7-Bar Harrow

As you can see, there are many advantages to using a Riteway 7-bar harrow to prepare your fields for seeding and manage the crop residue after harvest.


Brad, Riteway Manufacturing, walks through the features on the 7-Bar Harrow

------
If you have any questions about our Riteway 7-Bar, Heavy, or Rotary Harrows, or any of our other tillage equipment, contact us or visit your nearest Flaman location.

Posted in Product Information | Tagged with Riteway harrow 7-bar heavy harrow tillage field prep seeding | More articles by Mitch Flaman

Maximize efficiency during your planting window with a seed tender from Flaman

Posted by Mitch Flaman Mar 24, 2022

Timing is everything. In the farming world, it is important to be ready to go when nature calls. Seed tenders are great tools to maximize efficiency and reduce downtime during the planting window. Similar to how grain carts keep the combines rolling at harvest time, seed tenders are designed to keep the drills in the field and maximize available seeding hours in the spring.

Some of the main reasons seed tenders are growing in popularity include:

1. Speed & Efficiency
2. Convenience, Versatility & Portability
3. Scale Benefits

Speed & Efficiency

Speed and efficiency are often the deciding factors that influence producers to purchase a seed tender. By reducing downtime when filling and maximizing the available hours to plant, farmers will notice the immediate benefits of owning a seed tender. There are only 24 hours in a day, and when utilized properly, more work can get done in less time. Seed tenders are often able to load an air cart faster and safer than a stand-alone seed truck and traditional auger.


Convey-All CST-1550

Convenience, Versatility & Portability

Convenience, versatility, and portability are all key aspects to improving efficiency. Seed tenders give you the ability to load up seed in advance and strategically position your fill site where it needs to be. This can reduce the manpower needed to move seed around the countryside if your farmland is scattered. One person can independently use the onboard conveyor to conveniently load the drill with the ease of a remote, reducing the need for extra bodies to move around in trucks and start/stop the fill auger before it overflows the tank.

Scale Benefits

Scale systems allow producers to precisely meter products when filling and emptying the seed tender and when filling the air cart or planter. This ensures operators know exactly how much seed is being allocated to which compartment This also allows for even distribution when filling the air cart to ensure there is no excess product left in one tank and not the other.
 
Whatever your reason for wanting to improve efficiency, the time is now to visit your local Flaman dealer and learn how to maximize your planting window with a new seed tender.
 
-----
At Flaman, we offer three options of seed tenders in our product lineup – the Convey-All Commercial Seed Tender, Convey-All Seed Cart, and the Haul All Side Draw Seed Tender. 


New to our product offering: Side Draw Seed Tenders from Haul All Industries

There are many different options and features to be aware of when considering a seed tender, including size, capacity, and functions. For more information on these three seed tenders options or to learn which one would best suit the needs of your operation, talk to one of our ag specialists at your nearest Flaman location.

Posted in Product Information | Tagged with seeding planting seed tender J&M Convey-All Haul All | More articles by Mitch Flaman

Reclaim land with a Kello-Bilt Disc Ripper from Flaman

Posted by Mitch Flaman Oct 14, 2021

It’s time to get ripping this fall and reclaim that land that hasn’t been seeded in years.

When the fall weather permits, tillage and other end-of-season work is necessary to get a jump start on prepping next year’s seedbed before the spring rush. Disc ripping is a great tillage method that you can use to break up hardpan and compaction layers, manage trash and crop residue, and increase acres by reclaiming some of the low spots in your field.

In-field product demo at the Discovery Farm site in Langham, SK

Given the dry conditions this year, the opportunity to reclaim low spots and disc dried-up sloughs is available. Using a Kello-Bilt Disc Ripper from Flaman allows you to improve moisture retention and root development by digging deeper into the ground.

Kello-Bilt Disc Rippers feature five adjustable ripping shanks that allow for depths of 12”, 15”, and 18”, setting them apart from conventional tillage or other types of tillage practices. The heavy-duty shanks on this machine dig below the compaction layer beneath the soil’s surface and demolish the hardpan.

Effectively shattering the hardpan with a Kello-Bilt 275DR allows plant roots to penetrate the soil further while accessing additional nutrients and moisture.

An interesting analogy when trying to understand how disc rippers reclaim land in dried-up slough bottoms is to think of a pool liner. After years of water sitting in a low spot on your field, the water saturation in the soil tightens up and creates a layer much like a pool liner. Disc ripping a dried-up slough bottom penetrates this liner, aerating the soil and allowing it to breathe again.

This increases soil efficiency with better moisture retention, microbial activity, and balanced pH levels to help reduce saline patches. In other words, “healthier soil” that will produce healthier plants.



The beauty of seeding into a low spot (once the slough bed has been properly disc ripped) is the likelihood of that land seeing moisture in the following crop year. In dry growing seasons, this additional moisture can be the difference between a heavy, high-busheling crop and a below-average yield.


 
For more information on how a Kello-Bilt Disc Ripper can help with seedbed preparation, managing post-harvest crop residue and trash this fall, or increasing acres next year by reclaiming land that hasn’t been seeded in years, talk to one of our ag specialists at your nearest Flaman location.


 Shaun walks through the features of the Kello-Bilt 275 Disc Ripper

----- 
Interested in trying out the Kello-Bilt 275DR on your farm but not ready to purchase? We offer short-term rentals of tillage and field prep equipment, as well as grain handling equipment, hay and livestock equipment, trailers, and more. Contact your local dealer for rental inquiries and current product availability.

Posted in New Products | Tagged with Kello-Bilt disc disc ripper disc ripping tillage | More articles by Mitch Flaman

Heavy harrow meets high speed tillage: Why the Schulte SoilStar Disc Harrow is the best of both worlds

Posted by Mitch Flaman Jun 03, 2021

There are a lot of different discs and harrows on the market, but there is nothing quite like the Schulte SoilStar Disc Harrow.

Whether you are cleaning up after a bumper crop or dealing with pulse residue post-harvest, properly managing the trash in your field is important prior to seeding. The Schulte DHX combines a 5-bar heavy harrow and a double row of wavy coulter discs. This unique design is engineered to properly size straw and manage it in the top 1.5” – 2” of the soil.

Pictured above: 5-bar heavy harrow & wavy coulter discs

Although traditional discs can be effective at leveling a field, they are also known to bury heavy straw residue down into the soil and not properly size it. The result of this is that the field may look like it has been left clean, but the straw remains intact below the surface. The problems arise when the air seeder brings the straw back to the surface in spring and creates trash piles.

Harrowing can also prove effective in providing a finer finish to the field prior to seeding, but heavy trash that remains after a large-yielding crop can bunch up and create substantial piles of material behind the equipment.

Schulte 60' Disc Harrow in action

The Schulte Disc Harrow is the best of both worlds. The 18” double row of wavy coulter discs are spaced at 7.2” and are available in 8 wave and 13 wave options – effectively sizing the straw in the top 1.5” – 2” of the soil. This levels the soil without being overly aggressive and without over-disturbing the topsoil like a concave disc.

The coulter discs move independently from the main frame, which allows the operator to either maximize the weight of the machine on the cutting edge of the discs or lift them completely and use the DHX as a 5-bar harrow.

The Schulte SoilStar is available in 36’ and 60’ widths and requires a minimum of 8 HP per foot. Depending on the stubble and soil conditions, the DHX can be pulled between 7-10 mph. 


DHX-600 (60' model) 

DHX-360 (36' model) 

Whether you are prepping the field in late fall or early spring, the Schulte DHX is proven to get you in the field sooner and maximize your time. With the ability to adjust the disc depth and tine angle from 35 degrees to 90 degrees, you no longer have to wait for ideal conditions to get rolling – the Schulte Disc Harrow is just as effective in wet conditions. When used in the springtime, the DHX can warm up the soil and speed up weed seed germination to promote a proper pre-seed burn off for producers hitting the field with a sprayer.

The versatility of the Schulte Disc Harrow is what sets it apart from the competition in the tillage world. 

Reagan from Schulte Industries walks us through the features of the DHX-360

-----
For more information on how the Schulte DHX can help you manage post-harvest trash and straw residue in your field this fall or quicken soil warming and increase water penetration next spring, talk to one of our ag specialists at your nearest Flaman location.

Posted in Product Information | Tagged with Schulte DHX disc harrow soilstar 5-bar coulter discs | More articles by Mitch Flaman

From start to finish, the Flaman Grain Systems team is right beside you

Posted by Mitch Flaman Apr 07, 2021

At Flaman, we understand that investing in your farming operation and expanding your yard site is important for continued growth and efficiency. That’s why we believe in supporting you from start to finish. 

Customers share their experiences working with the Flaman team for their drying & handling setups (above)

Our Grain Systems team are experts in grain handling, grain drying, and grain cleaning. When you buy from us you are not just buying a product, you are gaining the ongoing support of a team with over 50 years of experience.

From Start to Finish

One of our industry experts will sit down with you to discuss and understand what your needs are for the coming year, as well as any future plans you may have. From there we will design a phased approach, with future expansion in mind.

We provide complete engineered drawings constructed in-house, with multiple alternatives to come up with a solution that works for your operation.

Once the equipment is decided on, we will continue to work with you through the site preparation and construction. Our job is not done until your equipment is handling grain the way you expect it to. And even then, we don’t consider our job to be done. Rather, we shift our focus to make sure you remain satisfied with the performance of your equipment.

That’s where our Service Team comes in. This dedicated team of certified technicians specializes in after sales support including warranty, pre-season and post-season maintenance, optimization, and commissioning of your machines to ensure your equipment is always running at peak performance.


Our Service Team Lead explains what you can expect from our team even after the sale (above) 

We also offer access to a customer service hotline with live tech support after hours (in season only).

When you buy from us you are not just buying the equipment, you are buying the total solution. We have been here for over 60 years and we look forward to continuing to grow with you as your farming operation grows.

Map of Flaman Grain Handling and Drying sites throughout Saskatchewan & Manitoba (2021)

----- 
If you are considering adding grain handling, drying, or cleaning equipment to your farm, give us a call or talk to one our Grain Systems specialists at your nearest Flaman location. 

Posted in Division News | Tagged with grain systems grain handling grain drying grain cleaning optimization site drawings yard planning | More articles by Mitch Flaman

From start to finish, the Flaman Grain Systems team is right beside you

Posted by Mitch Flaman Apr 07, 2021

At Flaman, we understand that investing in your farming operation and expanding your yard site is important for continued growth and efficiency. That’s why we believe in supporting you from start to finish. 

Customers share their experiences working with the Flaman team for their drying & handling setups

Our Grain Systems team are experts in grain handling, grain drying, and grain cleaning. When you buy from us you are not just buying a product, you are gaining the ongoing support of a team with over 50 years of experience.

From Start to Finish

One of our industry experts will sit down with you to discuss and understand what your needs are for the coming year, as well as any future plans you may have. From there we will design a phased approach, with future expansion in mind.

We provide complete engineered drawings constructed in-house, with multiple alternatives to come up with a solution that works for your operation.

Once the equipment is decided on, we will continue to work with you through the site preparation and construction. Our job is not done until your equipment is handling grain the way you expect it to. And even then, we don’t consider our job to be done. Rather, we shift our focus to make sure you remain satisfied with the performance of your equipment.

That’s where our Service Team comes in. This dedicated team of certified technicians specializes in after-sales support including warranty, pre-season and post-season maintenance, optimization, and commissioning of your machines to ensure your equipment is always running at peak performance.


Our Service Team Lead explains what you can expect from our team even after the sale

We also offer access to a customer service hotline with live tech support after hours (in season only).

When you buy from us you are not just buying the equipment, you are buying the total solution. We have been here for over 60 years and we look forward to continuing to grow with you as your farming operation grows.

Map of Flaman Grain Handling and Drying sites throughout Saskatchewan & Manitoba (2021)

----- 
If you are considering adding grain handling, drying, or cleaning equipment to your farm, give us a call or talk to one our Grain Systems specialists at your nearest Flaman location. 

Posted in Division News | Tagged with grain systems grain handling grain drying grain cleaning optimization site drawings yard planning | More articles by Mitch Flaman

Increase efficiency & reduce downtime during spraying this year

Posted by Mitch Flaman Mar 05, 2021

What started in the fall of 2020 as an idea to build an innovative sprayer trailer designed with functionality and convenience at the top of mind has resulted in the ST series of agriculture sprayer tender trailers from Flaman.

Model ST-9100

With safety, speed, and ease of use as the three pillars of design, these trailers were created to efficiently mix different batches of chemicals and quickly fill your sprayer – all with minimal downtime.

Now that all the planning and engineering has been completed, we are excited to have these units rolling through our production lines and hitting the market for the spring 2021 and 2022 seasons.

“We listened to our customers and put together all their best ideas into these all-new, all-encompassing sprayer tailers. Giving the customer all the features that they have always wanted to have – all in one unit. Flaman is proud to bring this product offering out to the marketplace just in time for the busy spring farming season.”
Bret Watson, Engineer 

The Flaman ST-9100 and ST-9200 are tender-style trailers, built around a 53’ Behnke tri-axle trailer with a heavy-duty air ride suspension and 22.5” tires. They have an 80,000 lb GVWR, cross members on 12” centres, powder-coated paint, and Apitong hardwood decking. These trailers feature a 48” heavy-duty undermount toolbox for additional storage, mud flaps, and dual 2-speed jacks. The most notable difference of the ST-9100 and ST-9200 from other units on the market is the custom-designed 11’ upper kick compared to traditional 10’ upper kicks. This allows for a heavy-duty, low-profile 3,200 US gallon tank to clamp securely to the top deck with heavy-duty deck pins.


Chem Handler III

These ag sprayer trailers are completely outfitted with 3” hose and pipe for speed when filling and emptying the 4,500 US gallon (17,000L) tank on the back and the 3,200 US gallon (8300L) tank on the front. They are fastened directly to the trailer deck with heavy-duty steel mounting pins for safety instead of ratchet straps or chains. The entire system is controlled and mixed with a heavy-duty 3” Chem Handler III, a chemical handler that is fast, safe, and easy to use. The 3” steel piping is mounted under the trailer to keep the deck clean and eliminate the potential for tripping. The fill station is versatile and can feed either each tank individually or at the same time. 

Features that make the ST-9100 and ST-9200 stand out include: 

Stowable Fill Arm 

The stowable fill arm has been engineered with 5” HSS tubing to manage the hose when filling the sprayer. This versatile fill arm takes care of the weight of the 3” hose when it’s full of product, and it swings out when filling the sprayer and easily folds back in when you are done. Your back will thank you!
 

Stowable Stairs & Grate Tread

The stowable stairs give safe and easy access to the deck when managing the Chem Handler III. In a matter of seconds, the safety pins can be pulled out and the stairs can be folded down – no more hopping up and down from the deck like you are training for a Spartan Race! The textured grate steps provide additional traction and reduce the potential for unnecessary slips and falls.

Tote Storage

The tote storage is loaded with innovative features and has been engineered to safely store two chemical totes on top with secure ratchet strap tie-downs. It is easily accessible from both sides of the trailer, as well as from on top of the deck. It can be used to store extra fuel, additional hose and couplings, chemical jugs and treatments, tools, extra parts or sprayer nozzles, and safety equipment. It has strategically been offset towards the passenger side of the trailer to allow for additional walking room on the driver side and access the upper kick with an integrated safety handrail.
 

Sight Tubes

Both tanks have built-in sight tubes for easy water level readings.

LED Light Kit

The trailer comes standard with four LED lights to increase safety and reduce the chances of an accident after the sun goes down. There is a convenient light switch located on the passenger side of the tote cage and in easy reach from the ground or deck. All wires are run inside of the frame and are powered by the 7-pin trailer plug.

Hot Tank (available on the ST-9200)

The ST-9200 includes an additional 1680-gallon (6400L) Chembine Hot Tank. Designed to reduce wait times and increase efficiency, the Hot Tank can mix and agitate the next batch of treatment while the sprayer is out in the field. When the sprayer is ready for another fill, the Hot Tank can quickly unload the next batch of chemicals that have already been already prepared. This feature can be added to any ST-9100.

-----
For more information on the Flaman ST Series Sprayer Trailers, talk to one our ag & trailer specialists at your nearest Flaman location.

Posted in New Products | Tagged with spraying sprayer trailer ag trailer Flaman ST-9100 ST-9200 | More articles by Mitch Flaman

When the elevator calls on a cold day, will your auger be ready? Take these tips for a dependable cold weather start

Posted by Mitch Flaman Feb 11, 2021

With the cold weather snap we've been having, I'm reminded that my dad always said, "Things just start breaking down and don't work well after -25". That being said, you don't always have the luxury of taking a day off when the elevator calls for grain in the middle of winter. In case you're in a rush and it's too cold to fire up the auger to load the trucks, take a few minutes and remind yourself of a couple of key tips to ensure that your auger or conveyor starts when you need it to.

Fuel
Fuel problems always seem to show up when the cold hits. The two most common fuel problems are:
1. Old/dirty fuel
2. Water in the fuel

Make sure you are always using good clean fuel. Check your fuel filters often, and replace them when necessary. It's the easiest way to ensure the auger engine will start easy and run clean at a cold, crucial time. The last thing you want when you're in a rush is pausing to clean the carb or rip the engine apart. If you're not sure how old the fuel is in the jerry can you're about to use, you're better off using it for a bonfire. Go get some new stuff and prevent the headache.

Water in fuel is as bad as dirty or old fuel, and sometimes worse. Because water is heavier than fuel, it will usually find its way to the bottom of the tank, often where the fuel line feeds the carburetor. And you can be sure that it will either freeze up when it's cold or prevent the motor from igniting when you need it to most. If there is a drain valve on your auger, it is recommended you periodically drain the fuel in the spring or when the unit is warmed up in the shop. Fuel additives such as Sea Foam or isopropyl-based gas line antifreeze can also help mitigate the problems old or water-based fuel can pose on engines.

EFI vs Carbureted Engines

Most farms have augers or conveyors with both carbureted and EFI (electronic fuel injection) motors. Although they operate very much the same, the starting procedure may differ.

On a carbureted engine, add a small amount of throttle to ensure the engine will idle, pull the choke fully out and start to crank the motor over. Be sure not to over-throttle and flood the engine. Once the motor fires and runs for a few seconds, you can usually push the choke in half-way and let the engine warm-up for 5-15 minutes. After the engine is good and warm, you can push the choke in all the way and you should be good to go.

When cold starting an EFI engine, there are a couple other things to consider. Set the throttle to approximately one-third open (between idle and one-half throttle), turn the key on, and watch for any lights on the control panels. This will ensure everything is powering up. Listen for a humming sound to confirm the electric fuel pump is working. After the pump kicks in, fully turn the key to the start position and start cranking the engine over. If it stalls or does not start after a few seconds, cycle the key to the off position, and repeat this step. Wait for the electric pump to kick in again and start cranking the engine over. This may need to be repeated multiple times. Once the engine is idling and running, allow 5-15 minutes for it to warm up before putting any load on it.

Following the tips above will ensure you the best chance of making sure your auger/conveyor starts in the cold weather. Sometimes it is just too cold for an engine to start regardless of what prep work you do. In that case, it might be time to go inside where it's warm, and browse here for a new auger with modern technology and new, clean fuel in the tank!

-----
For more information on our grain handling equipment, auger accessories, or to learn more about cold starting an engine, talk to one of our agriculture specialists at your nearest Flaman location. 

Posted in Product Information | Tagged with auger conveyor engine EFI carburetor cold start | More articles by Mitch Flaman

After 50 years, Kello-Bilt discs remain innovative, family-manufactured, and built to stand up

Posted by Mitch Flaman Feb 03, 2021

When buying a field disc, you need the confidence to know that it is going to work the way you expect when you need it and not break down, leaving you stranded with work to be done. This is why Flaman chose to team up with Kello-Bilt products over 40 years ago. Like Flaman, Kello-Bilt remains a family-owned business that keeps quality and reputation top of mind. A field disc is meant to be put through tough conditions. Continued innovation is what has kept Kello-Bilt tillage equipment ahead of the curve and outlasting its competitors.
 

Kello-Bilt Tandem Disc - Model 225TSW

For over 50 years, Kello-Bilt discs have been Canadian-made to “be better”. They’re built heavy and designed to last in the toughest conditions. The company has continued to evolve with experience and improve the things that “didn’t work” or simply didn’t stand up to other discs in the tough Canadian environment. This is how the idea for the self-lubricating oil-bath bearing was born. The self-lubricating oil-bath bearing proved to be superior to traditional greaseable ball bearings.
 
Today, regardless of price, Kello-Bilt discs are still manufactured to the highest standard with Canadian and North American steel. They are constructed with high-strength steel tubing, heavy gussets, and powder-coated components to ensure best-in-class quality and performance. This ensures the longevity of your purchase for years to come. The oil-bath bearings and boron steel blades are designed and sourced from Brazil and Argentina specifically for Kello-Bilt. Boron steel blades are less brittle than traditional carbon steel blades. 
 
Oil-Bath Bearing Interior

The oil-bath bearing uses two tapered roller bearings mounted in a cast housing. The dual-cone seal constantly lubricates the bearing. They sit on the interior axle, which is never in contact with the actual gang shaft. Tapered roller bearings are ideal for a disc application because they are designed for side thrust. Most of the pressure a disc blade faces is side pressure, NOT radial pressure. Ball bearings are designed for radial pressure. Oil-bath bearings are extremely low maintenance. Testimonials show Kello-Bilt discs from the 1980s are still operating with their original bearings after over five or more sets of replacement blades. The beauty of the oil-bath bearing is that they’re rebuildable. As long as you make sure not to run the blades too loose, as it will put pressure on the housing and cause leakage, the bearings can last for decades. 


Kello-Bilt Offset Disc - Model 275
 
If you’re serious about purchasing a quality field disc, contact your local Flaman dealer today. A Kello-Bilt disc with oil-bath bearings might be as serious as you are.
Posted in New Products | Tagged with Kello-Bilt disc field disc tillage | More articles by Mitch Flaman

Three reasons the Batco BCX3 needs to be your next conveyor

Posted by Mitch Flaman Jan 21, 2021

It’s here. The legendary orange “gentle giant” from AGI/Batco has received more than a facelift for 2021. After a complete redesign from hopper to downspout, the BCX3 conveyor has a few new features worth bragging about. Aside from the redesigned S-Drive, new Turbo-Clean Wash System, and remodeled fuel tank, there are still 3 big upgrades that make this the most versatile conveyor yet.

1. Move All Commodities - Most notably, the biggest feature of 2021 is the BCX3 conveyor’s ability to move all farm commodities - that’s right, INCLUDING CANOLA. Gentle on pulses, quick on cereals, and capable of oilseeds, you now have one tool for all your jobs. This has been made possible with a redesigned hopper & downspout, plus the new Turbo-Clean wash system with multiple scrapers & brushes. As with the use of any oilseed, additional maintenance and cleaning is required to ensure the longevity of your conveyor.  
    
2. Multiple Controls, One Location - Redesigned, with functionality and safety in mind, you will find all the controls in one location. This means you can adjust the throttle, engage the clutch, change the height for both hopper & discharge, and drive all from one spot. No more reaching. The conveyor’s control center has been relocated to provide better ergonomics and visibility as you drive, as well as additional clearance when setting up underneath your hopper.  
   
   
   Ergonomic Command Centre
    
3. Move with Ease - A completely redesigned mover adds substantial traction and maneuverability for your conveyor. The new all-terrain tire design has been coupled with an internal braking system to prevent rollback. The drop-and-go design is simple and safe - no more engaging or locking hubs. The drive wheel has been relocated to better utilize the weight distribution of the conveyor. This adds strength and exceptional traction. Did we mention the increased turning radius? The new mover design offers unparalleled maneuverability and versatility. 
   
   
   Redesigned Mover Kit

You need to see it to believe it.  

For more information on our AGI Batco BCX3 conveyors, talk to one of our ag specialists at your nearest Flaman location or give us a visit and we would be happy to show you what all the buzz is about! We may even let you take it for a spin. Even with winter conditions, we can assure you that you won’t need to worry about getting it stuck! 

Posted in New Products | Tagged with conveyor Batco BCX3 grain handling | More articles by Mitch Flaman

Trailering 'Rules of the Road' Updated

Posted by Flaman Agriculture Jun 08, 2016

There are a wide variety of trailer regulations imposed across Canada - these regulations cover everything from annual inspections, to dimensions, to brake requirements.  Your trailer my conform to your province’s regulations, but what happens when you travel into another province?
 
You may be completely law-abiding in your province, then travel into the neighboring one and find-out an inspection is required the instant you enter the other jurisdiction.  Or maybe your trailer is fine, but now since  you have attached a trailer to your truck, the truck now requires an inspection.  Or maybe the load this time is heavier than last time, so last time you were OK in the next jurisdiction but this time you are not.
 
Flaman Trailers has grown to become North America’s largest trailer retailer.  This growth is in part due to, and brings with it a responsibility to be aware of the various provincial regulations regarding trailers.
 
So, Flaman Trailers VP – Steve Whittington created a “Rules of the Road” presentation to address these issues.   This presentation was first conducted at NATDA (North American Trailer Dealers Association) in 2012 and has been updated to 2016 regulations
 
“Rules of the Road” is available for free download here
 
If you have any questions or concerns about trailering, we are happy to help!
 
Posted in Trailer Tips | Tagged with Information Regulations | More articles by Flaman Agriculture

Flaman Fitness wins Edmonton Journal Readers Choice Award

Posted by Flaman Agriculture Nov 30, 2015

On November 27, 2015 the Edmonton Journal published . . .

“Today’s the Day.” Those three words have been dominant at Flaman Fitness in the past year. But for the national fitness company, they are not just a slogan, but a powerful message that Flaman wants to spread to all Canadians.

“It’s a message of hope that you can start your fitness journey any day,” says Steve Whittington, Flaman Fitness’ vice-president of marketing. “You don’t have to wait for a Monday or New Year’s Day. You just need to start. And it doesn’t have to be this grand gesture of a diet or a detailed workout plan. Just be a little more active each day and eat smarter. And we’re here to help you with that journey.”
The company launched the “Today’s the Day” campaign in October of last year and Whittington says customers have responded positively. A large proof of their success is the engagement that customers are having with the resources Flaman provides to help them. More people are coming to their website and reading their fitness blog.
But Whittington says customers can now look forward to a new, mobile-friendly website they’re launching shortly. A new section, called Learn, is loaded with fitness resources, including articles, workouts, videos and much more.
“Learn is for anyone, whether you’re a fitness enthusiast or just starting out,” says Whittington. “You can go here to get inspired and get great information on setting goals and improving your personal health.
“People are interested in the support we’re providing,” he adds. “We feel that this new site is o ering much more support for the customer and we hope it will resonate with them.”
Whittington believes that being selected for a Reader’s Choice Award in Edmonton again this year is reinforcement of the path the company is on to serve the customer first. And they want their message to reach beyond just their current customers.
“We have a health crisis in Canada,” says Whittington. According to 2014 statistics from Health Canada, 54 per cent of adults in the country and 23.1 per cent of youth in Canada are overweight or obese.
“As a national fitness brand with the reach that we have, I believe we have an obligation to join the fight to make Canada a healthier place.
“Maybe you didn’t run yesterday, but today’s the day you can!” says Whittington. “Every day can be a day that you can start. Fitness shouldn’t be solely about image, it’s about feeling better and living better.”
 
Here's how the page looked:


 
Posted in Local News | Tagged with Edmonton Journal Readers' Choice Flaman Fitness | More articles by Flaman Agriculture

SK Snowmobile Registration Changes

Posted by Flaman Agriculture Nov 30, 2015

The Saskatchewan Snowmobile Association reminded riders last week that effective November 1, 2015 snowmobile registrations have changed to coincide with the snowmobile season, which is July 1st - June 30th as defined in The Snowmobile Regulations.
This was done to ensure the proper snowmobile registration fees were being collected.  Prior to this change, some snowmobile owners paid the snowmobile registration fee once but the snowmobile registration spanned over two riding seasons.  This change will close that loophole.
Please be advised that you may still pick any expiry date for your snowmobile registration, but the registration term cannot extend past June 30th of any given year.  For example, you could register your snowmobile from November 1st to April 15th.
All snowmobiles must be registered and the operator licensed before being driven on public land (i.e. roads (where allowed), ditches, other highway rights of way, provincial parks, Crown land, designated snowmobile trails, rivers or lakes).  And, to clarify, registration is not required to drive on privately-owned land if permission is granted by the owner/tenant.
And on a side note, although an ATV cannot be registered, it must be insured with a $200,000 liability policy before it can be operated in public areas.
For more information and a link to the “Snowmobile Act” go here
The guide from SGI called “Snowmobiling in Saskatchewan” is here
 
Posted in Local News | Tagged with Information Regulations | More articles by Flaman Agriculture

Interview with Flaman Nisku's Shop Foreman, Jeff Luciow

Posted by Flaman Jun 03, 2015

 

Posted in Local News | Tagged with shop foreman Flaman Nisku cooperation team leader | More articles by Flaman

Flaman Yard Safety

Posted by Flaman May 27, 2015

Safety is everyone’s responsibility!

Posted in Local News | Tagged with yard safety Flaman | More articles by Flaman

What is the NATM?

Posted by Flaman Feb 23, 2015

So if you’re looking for a new or used trailer, keep this in mind. Look for NATM dealer associate marked trailers and do your research. It’s worth it. 

Posted in Trailer Tips | Tagged with NATM trailers safety Flaman | More articles by Flaman

Nisku's Own JP Blenke Featured in Edmonton Journal

Posted by Flaman Feb 10, 2015

 I am fortunate to get to work with an amazing group of people here at the Flaman Nisku store. We are all kind of like one big, crazy, supportive family. It makes coming to work everyday enjoyable because I know that at some point today I will get the chance to talk to one of my co-workers and learn something from them or share a laugh.

With the position that I have here (Marketing Coordinator), I get to work closely with almost everyone here at some point in time during the year. Some people are graced with my presence in their office more often than not. JP is one of those lucky people.

JP and I work together on a weekly basis keeping the Ag Clearance site up to date. He was recently featured in an article in the Edmonton Journal about his accomplishments and how he has adapted to life after a childhood accident took both of his arms.

Check out the article:

www.edmontonjournal.com/Lees+Farm+equipment+sales+poster+triumph+over+adversity/10797409/story.html

Posted in Local News | Tagged with JP Flaman Edmonton Journal article triumph accident | More articles by Flaman

2014 Flaman Rental Meeting in VEGAS!

Posted by Flaman Dec 10, 2014

    

Posted in Division News | Tagged with vegas rental flaman fun | More articles by Flaman

Flaman Dragon Slayers Rip Up the River!

Posted by Flaman Aug 22, 2014

    

Posted in Local News | Tagged with dragon boating Flaman Dragon Slayers Edmonton Dragon Boating Festival 2014 Rip up the River paddling | More articles by Flaman

The Face Behind Flaman Communications

Posted by Flaman Jun 17, 2014

My email address is erin.mitchell@flaman.com and I’m hoping that you guys will send me some interesting content, some new blog postings or even just a quick email to say “hi”. I want to meet as many of you as possible. Have a wonderful day! :) 

Posted in Division News | Tagged with feedback Facebook blog emailer newsletter | More articles by Flaman

Reflecting Back on the April 2014 Frank Flaman Foundation Guatemala Humanitarian Trip

Posted by Flaman Jun 11, 2014

 This blog was written with input from Brian Rask, Dave Schultz, Wayne Sumners and Barney Bartley all from our Prince Albert, SK location.

Posted in Local News | Tagged with Frank Flaman Foundation reflecting Guatemala humanitarian trip | More articles by Flaman

Sled N Snap 2013/2014 Winners

Posted by Flaman May 02, 2014

Our 2013/2014 Sled’n Snap contest has come to a close and the winners have been announced. This year was my first experience with this contest and it sure was fun to witness. All of the pictures that people submitted were amazing! The trick riding shots and the ones of kids having so much fun were my favourite.
 
This was also the first year that Sled’n Snap went international with North Dakota joining Alberta, Saskatchewan and Manitoba. The more the merrier! Making this contest available to more people is what it’s all about.
 
I also found it interesting that there was a lot of conversations happening on the Sled’n Snap website during the contest. People were sharing their favourite routes and commenting on their favourite pictures. That’s the best way to discover new trails to explore.
 
I believe that this contest is only just getting started. This year's was great, but I have a feeling that next year is going to be awesome! I’m really looking forward to seeing what pictures the snowmobiling community snap next year.
 
Congratulations to Jason Holt of Saskatchewan for winning the grand prize! Jason won the use of a 4-Place Enclosed Snowmobile Trailer for a year.
 
Have a look at the video of the name drawing for the 2-place Aluma trailers There was one winner for each region.
https://www.youtube.com/watch?v=RJzo8v8EMX0
 
Check out the other winners at https://slednsnap.com
 
Posted in Division News | Tagged with sled n snap winners 2-place aluma trailer photos | More articles by Flaman

The 8th Annual Frank Flaman Foundation Gala: A Night of Glitz, Glamor and the Flaman Man!

Posted by Flaman Mar 31, 2014

I really did enjoy myself that evening. I even managed to drag my boyfriend out on the dance floor for a couple of songs. The energy in the room was lively and happy. Flaman Man himself even made an appearance and I got the chance to get my picture taken with him! Dream come true as a Flaman employee! The Gala was once again a fantastic success! I am looking forward to attending next year’s. 

Posted in Local News | Tagged with gala frank flaman foundation generosity flaman man | More articles by Flaman

Flaman Helps Taylor's Dream Come True

Posted by Flaman Mar 26, 2014

Flaman is so happy that we could help Taylor out with her dream. Who knows how big her business is going to get. Great job Taylor, and keep up the good work 

Posted in Local News | Tagged with donation entrepreneur Taylor Saskatoon dream | More articles by Flaman

Keeping Things Fresh at the Frank Flaman Foundation

Posted by Crystal Flaman Mar 10, 2014

Posted in Local News | Tagged with Flaman Foundation gala humanitarian trip website | More articles by Crystal Flaman

Flaman Serves Up Some Hot Lunch

Posted by Flaman Jan 15, 2014

The Frank Flaman Foundation contributes funds to this and many other charities locally, and around the world. As an employee, it’s great to see the change that our donations can make within the community. I got to sit and eat with the grade one students and the smiles on their faces put things into perspective for me. It makes me proud to work for a company that contributes to worthwhile causes. 

Posted in Local News | Tagged with community Frank Flaman Foundation school hot lunch volunteer | More articles by Flaman

Flaman's Annual Rental Meeting in Phoenix: Fun and Learning in the Sun!

Posted by Flaman Dec 20, 2013

Rental dealers from all across the prairies including BC and even Montana all gathered at the Arizona Grand Resort in Phoenix, AZ on Nov 27 - Dec 1

There were just over 100 of us for this year's meeting trip. We were also proud to have in attendance some of our top suppliers and business partners such as Riteway Mfg, Schulte, Haukaas, Wheatheart, Calidon Leasing, National Leasing.

Also attending was 3 of our new SK and MB dealers!

The trip was a great escape from our tough winter conditions and the overall experience was very positive.  While some areas had slight decreases in revenue this year, everyone agreed that the current economic situation in Western Canada is very favourable and with a lot of hard work and a little luck in the way of weather, we will plan for a very strong year coming up.  The goal of our annual meeting is to bring all of our rental dealers together to share information to continue to grow our business.  The mingling of dealers, suppliers, and staff allows us to keep moving forward and strengthening the business and personal relationships that are so important and somewhat rare in this digital world.  We still believe that face time spent together is the best way to build a successful business and that is what the annual dealer meeting is all about.

Highlights included:

Golf, golf, golf. Many dealers took advantage of the beautiful course and golfed daily while the ladies shopped, shopped, shopped

NHL game sat night with the Blackhawks in town! Was an exciting game and experience

ATV tour - about 15 dealers went on a quad tour in the desert! Was a blast. Someone (Scott from Riteway) got a little carried away and may have injured his tailbone as his quad did a backflip

Steve Whittington, Flaman’s VP of Marketing and Communications took us on a detailed journey of his trip up Mount Everest.

Awards night gala presenting top dealers in each territory and top new dealer and community service awards

Meeting topics discussed included:

Introduction of new dealers
New dealer agreements
COOP advertising improvements
Advertising plan for 2014
Tips on increasing rental revenue
Introducing the new corporate stores (Lethbridge, Medicine Hat)
Year in review both corporate level and rental dealers
Flaman Foundation
Booking program introduction for Alberta and improvements
New products and equipment
New rental rates 2014
GPS for tracking acre counts

I would like to thank all rental dealers who attended the meeting for your support and hard work that goes into our business every year.  Thank you to the key suppliers that joined our meeting and helped sponsor the cost of the meeting to keep the costs down to dealers who attended.  Thanks to the Flaman staff who came and helped keep everyone looked after and entertained.  Thanks to Wayne, Ken and Kelsey for helping to organize the meetings and events. A very big thank you to Wayne Beckett who came up with the idea to have the meeting in Phoenix and did most of the work organizing the venue and travel arrangements.  And last, but not least, thanks to Rocky Amson and Frank Flaman for allowing us to organize these meetings for rental dealers and to give us the means to keep building this business.

Parrish Kondra

2013 Flaman Rental Dealer Awards

Top New Dealer – Interlake Rentals – Arborg, MB
Community Service Award (Sask/Man) – MarDee Enterprises – Brandon, MB
Community Service Award (Alberta/BC/USA) – Nanton Rentals – Nanton, AB
Top Retail Sales (Sask/Man) – Triple D & P Farms – Birsay, SK
Top Retail Sales (AB/BC/USA) – Smoky River Equipment Sales and Rentals – Falher, AB

Top 5 Dealers (Sask/Man)

#5 – Ike Friesen – Morden, MB
#4 – B & D Rentals – Cutknife, SK
#3 – Brendonn Holdings – Russell, MB
#2 – B & A Petroleum – Swift Current, SK
#1 – Reliant Sales and Rentals – Windthorst, SK

Top 5 (Alberta, BC, USA)

#5 – Wetaskiwin Bulk Sales – Wetaskiwin, AB
#4 – Koch Fuels – Carstairs, AB
#3 – Ray Agro & Petroleum – Barrhead, AB
#2 – Will’s Welding – Ponoka, AB
#1 – Keddie’s Rentals – Grande Prairie, AB

 

Posted in Division News | Tagged with rental meeting rental dealer awards top 5 deals phoenix | More articles by Flaman

Grow a Mo to Support Your Bros

Posted by Flaman Nov 29, 2013

    

Posted in Local News | Tagged with Movember moustache donation | More articles by Flaman

Trailtech Multideck: The solution to almost all of your problems.

Posted by Mark Flaman Jul 03, 2013

So imagine this. You've got a weekend warrior that you run at the track, and you need a lowboy trailer to throw your high horsepower car on top of. You've subsequently purchased a garden shed that measures eight feet by twelve, and you need a highboy to haul it up to the lake so that you don't have to worry about fitting it in between the fender wells. You need something that can tilt in either configuration so that you don't have to mess around with heavy ramps. Well fortunately for those of you who need this kind of versatility, we have an option that you may want to look further into.

In 2012, we started carrying the Multideck built by Trailtech in Gravelbourg SK, and saw that the optional towing configurations of this trailer are the closest thing to endless we've seen yet. You can order them with a stationary deck on the front in case you've got a skid steer and you need a place to store a bucket that doesn't move. It features a four way lift system that not only elevates from a lowboy up to a highboy and back down, but also a two-way tilt feature to get the back of the deck on the ground for ease of loading. The trailer uses an electric / hydraulic pump to actuate the lift systems, and has an optional fast-charge kit so that you can plug the trailer right into the truck to charge it.

Like the idea, but concerned about the weight on the hitch? No problem. We offer the Multideck in a gooseneck option as well. Some models come with hinged dovetails. It would be nice to one day see a charge kit built in so that you could simply plug it into a 110V receptacle, but I don't think it'll be too far down the road, as we're starting to see manufacturers implement this technology into trailers that feature electric components. Either way, you're sure to be hassled by your friends to use it on a constant basis.

Posted in Trailer Tips | Tagged with trailtech multideck lowboy highboy configurable | More articles by Mark Flaman

Rain, Rain Go Away

Posted by Mark Flaman Jul 02, 2013

Well, we've had about as much rain as a person needs for the rest of the year. It seems like it's been raining across the province non-stop for the last two weeks of June. We've seen an exceptional amount of flooding this year across western Canada, mainly in High River & Calgary Alberta, but the immense rain stretched and blanketed over Saskatchewan for almost the whole of the last two weeks of the month. In Manitoba and Saskatchewan, most farmers are at least a couple of weeks behind due to the late thaw of the snow, but as it happened, the thaw occurred too fast and now we're left with all this water.

It's one thing when you see it on the news, but recently I've been seeing it a lot first hand in Saskatoon as well as the RM of Corman Park, where out Saskatoon store is located. There are farmers with children that have to get off the bus and throw on their rubber boots just to get down the lane way. There are also acreage owners here that have to leave a vehicle at the end of the driveway, and come back and forth to the house with an ATV.  There have been evacuees flooding in from northern Saskatchewan, from places such as Cumberland House who are staying at soccer & events centers around this city. These folks will thankfully be able to return home on July 3rd.

But yet, nothing compares to the damage being done in Alberta. There have been fatalities due to the flooding, and there are going to be millions in damages by the time this is all said and done. The Calgary Zoo had to relocate most of their animals, and had a few scares with losing some to the flood. The Saddle dome and Stampede grounds are under water, and several neighborhoods had to evacuate and relocate to drier ground. As our nation's fourth largest city is crippled by these floods, we stand by them as they can use all the support we have to offer.

 The weather forecast shows that this is about it for the rain we're about to receive, and brighter days are ahead. We had a great Canada Day July long weekend, and we're going to be hovering around the 25 degree mark for the next two weeks with the exception of a little rain this weekend.

Posted in Local News | Tagged with rain flood flooding saskatchewan flaman alberta calgary high river news | More articles by Mark Flaman

Flaman Rentals introduces new Damage Waiver Fee

Posted by Flaman Apr 19, 2013

As of May 1, 2013, all Flaman Rentals stores and agriculture rental dealers across the prairies will be introducing a new damage waiver fee for all of our equipment rental customers. This new fee is designed to help our customers offset the high cost of equipment repairs if they accidentally damage any rental equipment while in their possession.

By paying this small fee, our customers can now feel good knowing they have coverage for any accidental damage to tools or equipment they rent from Flaman. This coverage could save them hundreds of dollars in repairs.

It’s just one more way Flaman is helping our customers have a positive rental experience, knowing that those expensive pieces of rental equipment are covered while in their possession.

Please stop in or call your nearest Flaman rental store for full details.

Flaman Rentals in Moosomin, Yorkton and Swan River currently offer a similar fee and this will remain unchanged.

Posted in Product Information | Tagged with Flaman Rentals rental renting equipment trailers damage waiver fee protection | More articles by Flaman

Moosomin celebrates the opening of its new 16000 sq ft facility in a week long celebration

Posted by Flaman Apr 12, 2013

Open for two months, this new state of the art facility boasts a "rental drive thru bay" and a fully stocked 7000 sq ft showroom as well as a large service shop, wash bay and trailer set up bay.

“It's going to be really nice to be able to service and set up all of our equipment inside now as well as being able to load or unload our rental customers in the comfort of our rental drive thru bay,” says Peter Nabholz, store manager. “We think our rental customers will really enjoy this feature, especially when the weather is bad, it's the only drive thru rental bay on the prairies as far as we know,” he added.

This new 10 acre location on the west side of Moosomin along the busy Trans Canada Highway gives us great exposure, good visibility and easy access in all directions in or out of town. With over 90 trailers now in stock as well as grain bins, augers, grain carts, water tanks and other related short line agriculture equipment we are now a full line store for Flaman's. Similar to any of the other nine corporate Flaman stores in western Canada, Moosomin's new store also carries a fully stocked show room full of tow ropes, tow straps, trailer accessories, water pumps and over a dozen set up pieces of fitness equipment along with all the related fitness products.

“While in the past our main focus was the renting of construction, agriculture and home owner equipment, Flaman's now are gearing up the retail side of the business seeing the potential for explosive growth in this area. Here in Moosomin we are in the center of the economic boom going on in SE Sask and have already realized a huge demand for the products we now carry,” added Nabholz.

Flaman's saw the potential for a store like this in the area two years ago when they first came to Moosomin, buying out Wayne's Rental Centre. We now have the facility, the location, the staff and the inventory to take this store to the next level and hope to take advantage of the ongoing strong economy both in construction rentals and agriculture sales.

To celebrate this new store, Flaman's are having a full week long open house event starting on April 22 and winding up on Friday April 26. There will be toonie lunches and local entertainment at noon each day sponsored by one of the many suppliers.

Along with the celebrations, there will be many door crasher specials that you won't want to miss out on.

 

 

 

Posted in Local News | More articles by Flaman

Moosomin Store Gearing up for a Busy Spring

Posted by Flaman Mar 21, 2013

We have nicely settled into our new store located at 92 Cook Road in Moosomin. This is a great location as we have good visibility and access to the #1 Highway and easy access from all four directions in Southeast Saskatchewan.

 

We are putting the final plans together for our Grand Opening week, April 22 - 26. This will be an exciting week as we will have Supplier Representatives on hand to promote equipment and answer customer questions; in store specials; and we will be hosting a light lunch each day. The Ribbon Cutting will take place Friday afternoon and we will have a social evening to follow.

We will be hosting a Blind Driver Corporate Obstacle Challenge. Local business people will be blind folded and will drive a golf cart through an obstacle course with their passenger acting as the navigator. There will be daily heats with the finals on Friday. It should be very entertaining.

Rentals remains to be our backbone, but with our broader inventory selection our trailer and Ag sales are steadily increasing and our fitness equipment has been “working out” very well!

It looks to be a very exciting and busy spring for Flaman Group of Companies in Moosomin. If you are in the area come in and check out our new store.

 

Posted in Local News | More articles by Flaman

New Moosomin store open for business

Posted by Flaman Jan 29, 2013

Our new Moosomin store opened for business on December 18th. It was a big move from our old location, which was known in the community as basically just a rental store. We now have a full selection of parts, products and are able to offer a full service department to our customers.

Since we moved in our walk in traffic has increased. It's very exciting to meet new customers who are coming in now. December and January are typically slower months, so the interest in the new store has been a real positive. All of these new customers is getting us excited for spring when we have all the kinks worked out and will be running at full speed.

Many of the products we are selling have not been offered locally before. It feels good to be able to give people what they need in town. We are seeing a lot of activity with our ag products like grain bins, Wheatheart augers and grain carts.

Our fitness equipment moved in recently, which is very exciting because we will be the first fitness store in Moosomin. It surprised me how many people started calling for fitness equipment service as soon as we changed our name to Flaman. I ddn't realize there are that many people using Flaman Fitness in town!

We are having our grand opening celebration the week of April 23 - 26th. I am looking forward to the specials. barbeques and the ribbon cutting on Friday. It will be an exciting time to kick off the spring season!

Posted in Division News | More articles by Flaman

Exciting experiences at rental dealer meeting in Cuba

Posted by Flaman Jan 09, 2013

Cuba… oh boy where do I start? It was a fun filled week mixed with both business and a little pleasure. I was rather excited about this trip, as this was my first full dealer get together. I was rather nervous and not sure what to expect, especially with 100 of us crazy Canadians down in Cuba.

Posted in Division News | Tagged with Flaman Rentals rental dealers rental meeting awards | More articles by Flaman

Flaman Shares with the Community

Posted by Flaman Jul 17, 2012

As the new territory rental manager I had the chance to personally hand deliver a $10,000 donation cheque on behalf of the Frank Flaman Foundation to Ike Friesen of Morden, MB. Ike is one of Flaman’s all-time longest rental dealers, and has been part of the Flaman team for over 10 years now. He is also chairman for SHARE (Sharing Hope and Agriculture Resources of the Earth).

The SHARE project already has 425 acres of farmland planted this year with all proceeds donated to the Canadian Foodgrains Bank. Community growing projects are a unique way for people to contribute grain and other agricultural commodities to help people who are hungry around the world.

A typical project involves a group of people working together to farm a common plot of land. After harvest, the production is donated through the Canadian Foodgrains Bank for overseas food ais and agricultural development projects.

Flaman’s donation will be used towards crop input costs. Frank Flaman likes to donate money that's going to go right to the people. I was honoured to present this cheque to SHARE as it made me feel part of something that is a good cause and helping to fight hunger in our world.

For more information on the Canadian Foodgrains Bank please visit www.foodgrainsbank.ca/growing_projects.aspx

Ike Friesen and Parrish Kondra

Posted in Division News | Tagged with rentals donation SHARE food bank Flaman Foundation charity | More articles by Flaman

New Rental flyer is out now

Posted by Flaman Mar 30, 2012

Flaman Rentals has just finished producing and distributing the new Rental Rate Flyer for our eastern Saskatchewan and western Manitoba rental stores. It contains details and safety information as well as rental rates on all of our most popular equipment.

Posted in Division News | Tagged with rentals equipment Flaman rates flyer construction agriculture trailers | More articles by Flaman

The Moosomin rental store is expanding!

Posted by Flaman Jan 19, 2012

Flaman Sales and Rentals in Moosomin is happy to announce that we have officially begun construction on our new facility here in Moosomin. As part of the original take over from Wayne’s Rental Centre back in the spring of 2011, Flaman knew that they would soon need a much larger facility to work out of as business grew and expanded.

Posted in Local News | Tagged with rentals Moosomin expansion Flaman | More articles by Flaman

Three successful open houses/contractor appreciation days!

Posted by Flaman Jul 07, 2011

 

Posted in Local News | Tagged with Yorkton Moosomin Swan River Rentals Hilti Multi-Quip Bobcat Ditch Witch Top Con Makita Progression Trampoline | More articles by Flaman

Spring Clearance and Used Trailer Sale

Posted by Mark Flaman May 02, 2011

Every two years we replace the rental trailers in our fleets across all of our stores. We combine our pre-existing used inventory with our ‘birthday’ (clearance) trailers and add the trailers that come out of our rental fleets to make the largest trailer sale in our organization. We are currently clearing out over 350 trailers across western Canada, and we are sure we’ve got one to fit your bill. From small shuttle trailers, to motorcycle trailers, to car haulers, to dump trailers, to goosenecks, you’ll be hard pressed to find something we don’t have in our used inventory. Everything from aluminum to steel, light-duty to heavy-duty, in all sorts of colors, shapes and sizes. All trailers go through our service centers for a full inspection before they are put into our used inventory. 

Stop in at your nearest FLAMAN dealer, or visit our used selection online HERE.

 

Posted in Division News | Tagged with trailer sale spring clearance used flaman rentals low cost pre-owned | More articles by Mark Flaman